COMPU-SHACK PRODUCTION, INC.

CS-FDDI VL

NIC Type               FDDI
Network Transfer Rate  100Mbps
Data Bus               32-bit VESA Local Bus
Topology               Ring
Wiring Type            Shielded twisted pair (location unidentified)

                       Unshielded twisted pair (location unidentified)

                       Fiber optic cable (location unidentified)
Boot ROM               Available (location unidentified)

[Image]

                        USER CONFIGURABLE SETTINGS

               Function                      Label            Position

  »   Boot ROM disabled                      JP13/A             Open

      Boot ROM enabled                       JP13/A            Closed

  »   Factory configured - do not            JP13/E             Open
      alter

      Hard configuration mode            JP21/Pins 3 & 4        Open
      selected

      Soft configuration mode            JP21/Pins 3 & 4       Closed
      selected

                        BASE I/O ADDRESS SELECTION

        Address              JP13/B           JP13/C           JP13/D

          200h-21Fh          Closed           Closed           Closed

          220h-23Fh          Closed           Closed            Open

          240h-25Fh          Closed            Open            Closed

          280h-29Fh          Closed            Open             Open

  »       300h-31Fh           Open            Closed           Closed

          320h-33Fh           Open            Closed            Open

          340h-35Fh           Open             Open            Closed

                                       INTERRUPT SELECTION

   IRQ    JP2/A    JP2/B    JP2/C    JP2/D    JP2/E    JP2/F    JP2/G    JP2/H   JP2/I    JP2/J

      3    Open     Open     Open     Open    Open     Open     Open     Open     Open    Closed

      4    Open     Open     Open     Open    Open     Open     Open     Open    Closed    Open

  »   5    Open     Open     Open     Open    Open     Open     Open     Closed   Open     Open

      7    Open     Open     Open     Open    Open     Open     Closed   Open     Open     Open

      9    Open     Open     Open     Open    Open     Closed   Open     Open     Open     Open

      10   Open     Open     Open     Open    Closed   Open     Open     Open     Open     Open

      11   Open     Open     Open    Closed   Open     Open     Open     Open     Open     Open

      12   Open     Open    Closed    Open    Open     Open     Open     Open     Open     Open

      14   Open    Closed    Open     Open    Open     Open     Open     Open     Open     Open

      15  Closed    Open     Open     Open    Open     Open     Open     Open     Open     Open

                              TECHNICAL NOTE

            Notes: If software configuration is selected by closing
            JP21/pins 3 & 4, open jumpers JP13 and JP2.

            JP21/pins 1 & 2 function to toggle I/O address selection. If
            an I/O address collision is detected during installation, the
            shunt on JP21/pins 1 & 2 can be removed (while the PC is
            running) to force the software to try the next larger I/O
            address. For example, if a collision is detected using I/O
            address 300h, removing shunt on JP21/pins 1 & 2 will force
            the software to try I/O address 320h.